Medium Range Ultrasonic Level/Distance Transmitter-Switch
316SS,14ft Range,1" NPT,Multiple Outputs,RS-232
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Type 316 stainless steel housing (except PVC model)
- Ruggedized piezoelectric ultrasonic transducer
- Hardened & protected solid state electronics
- UV resistant, potted-in, PUR-jacketed cable
- All epoxy-potted for wet or dirty applications
- Short and overload protected outputs
- IP68 ingress rating (submersible)
- Easily connect with your equipment
- Includes both analog and switch outputs
- Communicates by serial data
- Optimize the sensor to the application
- Create stand-alone functions
- Duplicate applications without re-calibration
UMR14-1NPT-232 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Process Connection Type
Process Connection Size
Features
Category
Media Type
Max Measurement Range
Accuracy
Tank/Vessel Type
Max Operating Pressure
Max Process Temperature
Wetted Materials
Output Signal
Supply Power
- Accuracy Value ±0.5% of target range
- Cable Length 2M
- Dimensions (Dia x Length) 1.2" x 4.064"
- Environmental IP-68, NEMA 4X
- Maximum Ambient Humidity 100% RH Non-condensing
- Maximum Ambient Temperature 70°C (158°F)
- Measurement Type Level/Distance-Proximity/Dimension
- Minimum Ambient Humidity 0% RH
- Minimum Ambient Temperature -40°C (-40°F)
- Supply voltage 10 to 30 Vdc
- Ultrasonic Frequency 120 kHz
- Weight 10.4 oz
UMR14 Sensors and OmegaVIEW software put the power of ultrasonics in your hands yet retain the simplicity of push-button TEACH setup. You can quickly adjust, optimize, save and clone your applications without calibration. The UMR14 Sensors are designed to address close up and medium working distance requirements up to 14 ft. Narrow beam width and shortened minimum range gives closeup versatility. Serial data and analog outputs respond to measured distance. Non-contact technology means nothing touches your materials.
I want to know more about the beam shape and size of the transducer. But I have not seen anything in the documentation
Thank you for your inquiry about the ultrasonic sensor. Yes, the beam width is 12 degrees in conical shape and the transducers vary in size. Click on the Manual tab and you will find general dimensions of the different sensors available.
Date published: 2021-05-04
