The OMEGA™ RH650 precision invasive/non-invasive moisture meter with temperature, humidity (RH) and moisture readings is ideal for water damage restoration contractors, facility maintenance professionals and hvac system installers/technicians.
The RH650 reads a multitude of important humidity and moisture values including ambient temperature (°C or °F), relative humidity (RH), absolute humidity (in mg/L org/m3), GPP (mixing ratio in grains per pound or g/kg), relative moisture level using pinless sensor, absolute moisture level using included pin-type probe, dew point, atmospheric pressure and vapor pressure.
SPECIFICATIONS Ambient Temperature Measurement Range/Accuracy: -29 to 75°C (-20 to 167°F)/2°C (±3.6°F) RH Measurement Range: 0 to 100% RH Measurement Accuracy: ±2.5% from 11 to 90% RH ±3% RH elsewhere Absolute Humidity Range: 0.5 to 240 mg/m3 GPP Range: 0 to 999 GPP: (0 to 160g/kg) Relative/Absolute Moisture Level Range: 0 to 99.9% Pinless Moisture Measurement Depth: 19 mm (0.75") External Moisture Probe Measurement Accuracy/Resolution: ±3%/0.1% External Probe Pin Length: 10 mm (3/8") Dew Point Range: -60 to 60°C (76 to 140°F) Atmospheric Pressure Range: 30 to 120 kPA Vapor Pressure Range: 0 to 20.0 kPA Sampling Rate: 2X/sec Memory Capacity: 20 points Auto Power-Off Trigger: 30 minutes of inactivity Battery Life: 6 to 8 weeks (4 hrs/day use) Operating Temperature: 0 to 43°C (32 to 110°F) Dimensions: 185 L x 72 W x 36 mm D (7.3 x 2.8 x 1.4") Weight: 175 g (6.2 oz.) without battery Power Source: “9V” battery (included)
Rated 4 out of
5 by
BigPun from
So far so good.Buttons are a little tough to work though.................
Date published: 2016-04-28
Rated 5 out of
5 by
SpaceFence from
Just What I NeededGreat device. Very Responsive. I was able to take 45 temp, humidity and DEW readings in 30 min. Replication was very accurate.
Can you calibrate this device to insure scientific industry standards of measurement are met?
Asked by: Mick32
Hi Mick32,
Thank you for the inquiry. Please forward this request to TEMP@DWYEROMEGA.COM.
Best regards
OMEGA
Answered by: NorwalkAE_RS
Date published: 2024-03-18
Can I use this device to measure the moisture on a mash product? Like ground grain?
Asked by: Antoniel
Hi Antoneil,
Thank you for the inquiry. Using the external mode with pins materials such as soils or powders, the meter readings will reflect average moisture level near the surface. You may need deeper penetration provided by a grain moisture probe.
https://www.omega.com/en-us/temperature-measurement/temperature-and-humidity-and-dew-point-meters/p/HGM68-Meter
Best regards
OMEGA