Call us at 1-888-826-6342
Stainless Steel Housing IR sensor with Thermocouple Outputs
1:1 FOV , Type E, 140°C (280°F) to 190°C (370°F)
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $400.51 |
| 5-9 | $380.48 |
| 10-24 | $372.47 |
| 25-49 | $356.45 |
| 50-99 | $348.44 |
| 100+ | $340.43 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Stainless steel housing
- IP67 and IP65 housing rating
- Operating temperature range -18 to 85°C (0 to 185°F)
- No moving parts and no thermal mass errors
OS36-E-340F Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Process Temprature Range
Operating Temprature range
Output
Field of View
Accuracy @ Ambient
Laser Output
Built in Display
Emissivity
Cable Length
Spectral Response
Response Time
Intrisically Safe
- Housing Material Stainless Steel
- Maximum Storage Temperature 85°C (185°F)
- Minimum Storage Temperature -18°C (0°F)
- Repeatability 0.02°F (0.01°C)
- Sensor Diameter 0.50" (12.7mm)
- Sensor Length 1.75" (44.5mm)
The OS36 is an infrared sensor with thermocouple outputs with the advantages of non-contact temperature measurement. The OS36 produces a thermocouple output signal that can be used with any standard J, K, T or E thermocouple instrumentation. The thermocouple output option elmiminates the need for external power sources. The infrared sensor’s accuracy is specified for target emissivity 0.9. For other emissivity values, readings can be corrected to provide accurate measurements. Even without correction, the readings are extremely repeatable, for use in process and quality control applications.
The OS36 has a calibrated sensing range of -18 to 250°C (0 to 480°F) and operating temperature range of -18 to 85°C (0 to 185°F). These sensors can achieve higher ambient temperature ratings with the OS36-APC up to 538°C (1000°F) with water cooling or 400°C (750°F) with air-cooling. The housing is hermetically sealed and NEMA 4, IP65 and IP67 rated.
The OS36 is designed for applications such as rough steel plates, brick, paints, quartz, water, asbestos,unpolished stainless steel wood and more.
Rated 3 out of
5
by
GPALACIO from
Two weeks delivery delay
Good quality, easy to install. fast response...........................
Date published: 2016-09-07
Rated 5 out of
5
by
BSH VALLEN from
BSH TC Review
TC was exactly as specified and delivered on time per promised
Date published: 2022-09-06
I don't see neither in the data sheet nor on this page what is the type of the output signal other than blurry "computer interface and analog/digital" outputs are available. am I missing it? can you please advice is 4..20mA is possible?
Hi Alex123
I apologize for confusion. The output is a thermocouple signal. The type of thermocouple is indicated by letter in the part# (J,K,T, or E).
Best regards,
OMEGA
Date published: 2022-05-18
Does the IR sensor (OS36) work in vacuum chamber?
Thank you for your inquiry kevin666. Unfortunately, the OS36 does not work in a vacuum chamber.
Date published: 2022-05-17
what is the max range of the OS36-10. data sheet has a dimension of 10 X. 10 X of what?
Our Product Manager as advised that it's not Max distance, 10x is way of mentioning spot to distance ratio. The way this infrared works is you can keep this sensor to the distance 10x of the diameter of spot you are measuring. So if spot you are nearing is 1 inch diameter, the sensor needs to be around 10 inches away from spot to measure this accurately. Please contact our Tech Support if you have any further questions, thank you!
Date published: 2019-05-20
