Skip to search Skip to main content Skip to navigation

3-A Certified Sanitary Clamp High Temperature Turbine Meters

1" SS Hi Temp CIP Turbine Flow Meter w/ 1-1/2" Tri-Clamp

(0)

Click and hold to zoom

Data Sheet (PDF)

$2,660.00

Item# GSCPS-100

QTY

Added to Your Shopping Cart

In stock

Lead Time (If not in stock): 4 weeks

+ Add to Project List

Meets 3-A Sanitary Standards
Meets CIP, SIP, COP requirements
Meter includes a traditional design
Available in a variety of sizes

View Specs

GSCPS-100 Model Options

View all models

Edit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.

*Highlighted options are not compatible. Please select a different combination.

Flow Range

Process Connection Size

Features

Media Type

Accuracy

Output Signal

Max Process Temperature

Wetted Materials

Process Connection Type

Specs

Edit Model Options

The G-Series High Temperature Sanitary Turbine Flowmeters are volumetric flow measurement devices. The moving fluid is used to turn a rotor, which is suspended in the flow stream. The rotating speed of the rotor is proportional to the fluid velocity or flowrate. As the blades from a spinning rotor pass by a magnetic sensor, an AC voltage pulse is generated and transmitted to the readout instrument. Each pulse is equal to a given volume of liquid therefore “x” number of pulses are equal to a gallon, litre, pound, barrel, etc.

Select a Magnetic Pick-up from The Table

Selection Guide for 1 in. 1-1/2., 2 in. Turbine Meters
Magnetic Pickup type	Part No.	Application	Cable Type
Wire Lead Standard	81003000	Meter mount electronics. Temperature range: -100°F to +250°F. Sine wave output.	None

Herm/High Temp.	81002000	Remote mount electronics. Temperature range: -450°F to +258°F. Sine wave output.	T
High Temp. Standard	81007000	Remote mount electronics. Temperature range: -450°F to +800°F. Sine wave output.	T
Active Digital	81004000	Remote mount electronics. Temperature range: -40°F to +248°F. Square wave, open collector output, 5-32 VDC required. Signal output: 0-10V, NPN	D