Call us at 1-888-826-6342
204°C Max Constant Wattage Heating Cable 120-480 Vac
Medium Temperature Constant Wattage Heating Cable (Price Per Foot)
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $8.57 |
| 5-9 | $8.14 |
| 10-24 | $7.97 |
| 25-49 | $7.63 |
| 50-99 | $7.46 |
| 100+ | $7.28 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Continuous Exposure Rating up to 400°F
- Low Watt Density
- Parallel Resistance Heater
- Cut-to- Length at the Job Site
FE12-120B Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Supply Voltage
Power Density
Maximum Temperature Exposure
Wire Gauge
Approx. Cable Size
Insulation Material
Minimum Purchase Length
- Maximum Operating Temperature 232°C (450°F)
- dielectric Strength In excess of 2500 V
- Wire Material Nickel-chromium resistance wire
The FE cable heating element is tension wrapped and covered with a fluorocarbon film and enclosed in a minimum 20 mil FEP abrasion resistant extruded jacket. This tough outer cover provides moisture and dielectric protection as well as resistance to abrasion.
A tinned copper overbraid provides additional protection and electrical ground return path.
APPLICATIONS
OMEGALUX™ FE cable is a low Watt density electrical resistance heater. It is designed for freeze protection and midrange process temperature control and maintenance applications in lines periodically purged with 150 PSIG steam.
# Cable circuit module length in feet. When ordering please allow a minimum of 1 module length extra for terminations.
**Maximum Circuit Lengths include end-to-end voltage variation of 10%. Longer runs may be used. Lengths are based on cable operating temperatures of 300°F.
To complete your system the following accessories are recommended: (1) Termination kits for FE cable (see page B-31 for specifications), (2) Control options - see Section P for complete selection of controllers thermostats.
A tinned copper overbraid provides additional protection and electrical ground return path.
APPLICATIONS
OMEGALUX™ FE cable is a low Watt density electrical resistance heater. It is designed for freeze protection and midrange process temperature control and maintenance applications in lines periodically purged with 150 PSIG steam.
| Model No. | Watts/ft. | Volts | Module# Length (ft)1 | Max** Length (ft) |
| FE3-120B | 3 | 120 | 2 | 360 |
| FE3-240B | 3 | 240 | 4 | 720 |
| FE5-120B | 5 | 120 | 2 | 275 |
| FE5-240B | 5 | 240 | 3 | 550 |
| FE8-120B | 8 | 120 | 2 | 220 |
| FE8-208B | 8 | 208 | 4 | 381 |
| FE8-240B | 8 | 240 | 4 | 440 |
| FE8-277B | 8 | 277 | 4 | 508 |
| FE8-480B | 8 | 480 | 6 | 880 |
| FE12-120B | 12 | 120 | 2 | 180 |
| FE12-208B | 12 | 208 | 4 | 312 |
| FE12-240B | 12 | 240 | 2 | 360 |
| FE12-277B | 12 | 277 | 4 | 416 |
**Maximum Circuit Lengths include end-to-end voltage variation of 10%. Longer runs may be used. Lengths are based on cable operating temperatures of 300°F.
To complete your system the following accessories are recommended: (1) Termination kits for FE cable (see page B-31 for specifications), (2) Control options - see Section P for complete selection of controllers thermostats.
We purchased 8’ of fe8-480b and only need 2’. Can it be cut? It didn’t come with ends. What should we order for that? It’s self regulating so do we need a temperature control?
The FE-UC-KIT is sold for terminating the cable which can be cut. It is self regulating so a Controller is not required though some type of over temperature device to detect and open the circuit if an excessive temperature is reached is advised.
Date published: 2020-08-20
