Call us at 1-888-826-6342
B&K Vibro Accelerometer with MIL-C-5015 Connector
Brüel & Kjaer Vibro Accelerometer with MIL-C-5015 Connector
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $514.10 |
| 5-9 | $488.40 |
| 10-24 | $478.11 |
| 25-49 | $457.55 |
| 50-99 | $447.27 |
| 100+ | $436.99 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Rugged (IP66/ IP67) and corrosion resistant design
- Integrated cable - no additional screw-on connection needed
AS-062/050/0 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Acceleration Range
Frequency Range (Nominal)
Output Type
Mounting Type
Features
- Apx. Weight 130 g
- Capacity 5000 g
- Connection MIL C-5015
- Constant Current Supply +24 V Nominal (18 to 30 Vdc)
- Environmental Rating IP67/IP68
- Frequency range 1.5 Hz to 13 kHz (± 3 dB)
- Housing Material Stainless Steel
- Measuring Range ±80 g
- Mounting Screw Threaded stud M8 x 14 / Threaded stud M8 / 1/4“ 28 UNF
- Mounting Torque 3.5 Nm
- Nominal Sensitivity at 80 Hz 100 mV/g
- Operating Temperature Range -55 to 125 °C (-67 to 257 °F)
- Output Resistance ≤ 300 Ω
- Overload Capacity - Constant 500 g
- Resonant Frequency (Typical) >20 kHz
- Sensitivity Accuracy ± 5%
- Storage Temperature Range -20 to 70 °C (-4 to 158 °F)
The AS-062 is designed for industrial vibration measurements and particularly suitable for general measurements on rotating machinery. It covers a broad application range like monitoring of turbines compressors pumps generators etc. Its robust and high-quality design make this sensor the perfect match for demanding applications.
This acceleration sensor operates according to the piezo-electric principle. A piezo-element and an internal sensor mass form a spring-mass system in the sensor.
If this system is subjected to vibrations the mass produces an alternating force on the piezo element. As a result of the piezo effect an electrical charge is produced that is proportional to vibration acceleration. An integrated amplifier converts this charge signal into a usable voltage signal.
Brüel & Kjaer Vibro Accelerometer Selection Table
| Model | picture | sensor | Sensitivity | Sensitivity | Frequency | Resonant | measuring | connector | connector | cable |
|---|---|---|---|---|---|---|---|---|---|---|
AS-667 |
| compression type | 100 mV/g | ± 10% | 0.5 Hz to 13 kHz: (±3 dB) | typ 30 kHz | 60 g | M12 - 4 pole | top | mountable |
AS-668 |
| compression type | 100 mV/g | ± 10% | 0.5 Hz to 13 kHz: (±3 dB) | typ 30 kHz | 60 g | M12 - 4 pole | lateral | mountable |
AS-063 |
| compression type | 100 mV/g | ± 5% | 1.5 Hz to 13 kHz (± 3 dB) | 35kHz ± 3 kHz | 80 g | MIL-C-5015 | top | mountable |
AS-062 |
| compression type | 100 mV/g | ± 5% | 1.5 Hz to 13 kHz (± 3 dB) | > 20 kHz | 80 g | n.a. | lateral | integrated |
AS-070/001 |
| shear type (ring) | 100 mV/g | ± 20% | 0.32 Hz to 10 kHz (± 3 dB) | > 25 kHz | 50 g | n.a. | lateral | integrated |
